RVL-I PLUS
Reversible heat pump for outdoor installation with dc inverter compressor
This series of air-water heat pumps meets the winter and summer comfort requirements in residential installations, as well as small-mid sized commercial ones.
The unit is suitable for outdoor installation and can produce hot water up to 60°C. It may be employed in systems with radiant floor, fancoils, radiators and for the indirect production of domestic hot water (DHW) via an external storage tank (not supplied).
The heart of the heat pump consists in the DC inverter compressor offering modulation from 30% to 120% on the rated capacity.
High energy efficiency and low noise level are the main qualities of RVL-I PLUS.
It can be employed as the only generator in the system, as well as in combination with other energy sources such as backup electric heaters or boiler.
A temperature probe for domestic hot water tank is supplied with the appliance. An external air temperature probe (already installed on the unit) permits the climatic control both in heating and cooling modes.
All the chillers are accurately built and individually tested in the factory. The installation requires only electrical and plumbing connections.
THE RANGE
RVL-I PLUS 5
RVL-I PLUS 7
RVL-I PLUS 9
RVL-I PLUS 12
RVL-I PLUS 12T
RVL-I PLUS 14
RVL-I PLUS 14T
RVL-I PLUS 16
RVL-I PLUS 16T
OMNIA H
reversible heat pump for splt installation with dc inverter compressor
GENERAL CHARACTERISTICS:
The OMNIA range of heat pumps meets the requirements of space heating, space cooling and the production of domestic hot water for small and medium-sized residential and commercial plants.
It consists of an inverter external unit available of different capacities associated with a hydronic indoor unit proposed in two variants with or without 3kW electrical integration two-stage (1.5 + 1.5), both equipped as standard with integrated three-way valve for the production of domestic hot water through an external boiler.
The system is very versatile and can work at outdoor air temperatures down to -20 °C and produce hot water up to 60 °C with the aid of electrical integration.
Particularly suitable for use in radiant systems, fan coil units, radiators and for indirect production of domestic hot water (DHW) via an external boiler (not supplied).
Split refrigerant circuit to avoid risks of freezing in particularly for rigid outdoor applications.
The user interface consists of a digital remote controller (wired max 50m from the indoor unit) equipped with a large display and simple setting commands.